DVD Infrared Controller with 16 button contacts and RS-232 control from PC. User-programmable button functions. Field updatable for control of different machines.

Controls machines via RS-232 or IR. Accepts up to 16 closed-contact 'pushbuttonbutton' inputs. Has 8 GPI outputs to drive TTL loads, typically one 5V LED per output. Loop-through RS-232 for multi-controller operation. FLASH-Rom updatable for control of different machines.

Special Order Only - See the BCD VC-16b for more versatility.
The BCD DVD-C7 is a DVD player designed especially for exhibits. It has a built-in button controller and RS-232 control! Just connect your buttons and you're ready to go. The DVD-C7 is preprogrammed with the Arrows (Up, Down, Left, Right), Enter, Next, and Previous, but any command can be assigned to any button.

The BCD-C7 is our small controller that is installed in the DVD-C7 player as well as customer-supplied machines. It permits RS-232 and 7-Button control. Price includes controller and installation. Note: Most manufacturers will not honor warranties if the device has been modified.

Discontinued See the DVD-1150 with even more features.
The BCD-modified VCR is a VHS Recorder/Player equipped internally with BCD's C7 RS-232 controller. All basic transport commands are supported.

SMPTE LTC & VITC Genreate & Read. Composite Video I/O for VITC. Multiple units can generate synchronous VITC by synching with common LTC time code.

Controls RS-232 & RS-422 devices. VITC & LTC generate/read for precision control. S-Video & Composite video I/O w/VITC time code. Loop-through RS-232 daisy-chain for multi-controller operation.

Replaces the DVD-V7400. This is absolutely the top of the line player.

Industrial Quality Pushbutton for Exhibits.
Optional White LED Illuminator.
Approx 1-inch dia.

Industrial Quality Pushbutton for Exhibits.
Optional White LED Illuminator.
Approx 1.5-inch dia.

Industrial Quality Pushbutton for Exhibits.
Optional White LED Illuminator.
Approx 1-inch per side

Industrial Quality Pushbutton for Exhibits.
Optional White LED Illuminator.
Approx 1-inch per side

Our 'BIL' buttons already have a 14V incandescent bulb, but we never use them. They get hot and burn out. We offer bright White LEDs for our buttons. These are constantly ON and not controlled by the BCD interface. Power can come from the VC-16b or from a separate power supply ($25). Different colors available on special order, but usually we use colored inserts in the buttons.