bcdusa dot com - SB-100 Rear Panel A/V/TC Connections

bcdusa dot com
Tel. +1.405.843.4574 800-BCD-MPEG (800-223-6734)

Video & Time Code Control Systems
DVD Button & RS-232 Controllers
DVD Production

- BCD Home -

F.Y.I.

History Alive

The Virginia Historical Society's "History of Racism" is told with four kiosks, each with interviews of people who lived through those turbulent times. More in our Client Gallery.

SB-100 Rear Panel A/V/TC Connections

Back

BCD SB-100
Serial Controller
Rear Panel A/V/TC Connections


Signal Cable Set
Signal Cable Set (D-15 connector) NOTE: The labels on the Signal Cable Set are referenced to where they connect. (VCR/Monitor/Aux. Video). Pin Description 1. VTR Ch. 1 Out: Audio from VCR Audio Channel 1 Out 2. VTR Ch. 2 Out: Audio from VCR Audio Channel 2 Out 3. VTR Vid Out: Video from VCR. This is VITC IN to SB-100 for reading VITC. 4. VTR Add. Code In: LTC to VCR Audio Channel x from SB-100 (SB-100 TC Out) to generate LTC. 5. VTR Add. Code Out: LTC from VCR Audio Channel x to SB-100 (SB-100 TC In) for reading LTC. (Address Code In/Out cables will connect to either Audio Channel 1 or 2. We like channel 2. If you use an audio channel for Time Code, you may not use that same channel for Audio In/Out. In other words, you can't use the same audio channel for Time Code and Audio.) 6. GND 7. Reserved 8. GPI Out: GPI Out trig. 9. GND 10 Aux. Vid. Out: Auxiliary Video from another source to SB-100. Switched, but not recordable 11. N/C 12. GND 13. Mon. Vid. In: Video to TV Monitor. This is a switched output. VCR Mode Output STOP Aux. Video (AVID) (Also FFWD, REWD) RECORD VCR Looping Video from "VTR Vid Out" (E-E) PLAY VCR Video Off-Tape 14. Mon Aud 1 In: Audio 1 to TV Monitor 15. Mon Aud 2 In: Audio 2 to TV Monitor

S-Video Connectors
S-Video In: S-Video In to SB-100 from camera or other video source. VITC will be inserted. S-Video Out: S-Video Out from SB-100 to VCR or other destination. Contains new VITC. S-Video In and Composite Video In are shared and must NOT be connected simultaneously.

Composite Video Connectors
Vid Out:(top RCA) Composite Video Out from SB-100 to VCR or other destination. Contains new VITC. Vid. In:(bottom RCA) Composite Video In to SB-100 from camera or other video source. VITC will be inserted. Composite Video In and S-Video In are shared and must NOT be connected simultaneously.

LTC Time Code Connectors
LTC Out:(top RCA) LTC Out from SB-100 to VCR or other destination. New generated time code. LTC In:(bottom RCA) LTC In to SB-100 from VCR or other LTC source for reading time code. (This is the same as 'VTR Add. Code Out' on the Signal Cable Set.)

SB-100 Main Page Rear Panel Analog Signals \| Rear Panel Control Signals

< Prev		Next >

[ Back ]

BCD SB-100 Serial Controller Rear Panel A/V/TC Connections

BCD SB-100
Serial Controller
Rear Panel A/V/TC Connections