bcdusa dot com    
    Tel. +1.405.843.4574  800-BCD-MPEG (800-223-6734)

     Video & Time Code Control Systems
DVD Button & RS-232 Controllers
DVD Production

DVD Control RS-232, pushbutton, DVD recorder RS232, SMPTE Time Code, VITC Time Code
    - BCD Home -
 
   BCDusa.com BCDusa.com
 


SB-100 Rear Panel A/V/TC Connections

Back

BCD SB-100
Serial Controller

Rear Panel A/V/TC Connections


SB-100 Rear Panel - Left
Signal Cable Set Signal Cable Set connector -DB-15

Signal Cable Set (Optional for D-15 connector. Inquire for custom quotation)
NOTE:  The labels on the Signal Cable Set are referenced to where they connect. (VCR/Monitor/Aux. Video).

Pin       Description
1.   VTR Ch. 1 Out:  Audio from VCR Audio Channel 1 Out
2.   VTR Ch. 2 Out:  Audio from VCR Audio Channel 2 Out
3.   VTR Vid Out:  Video from VCR.  This is VITC IN to SB-100 for reading VITC.
4.   VTR Add. Code In: LTC to VCR Audio Channel x from SB-100 (SB-100 TC Out) to generate LTC.
5.   VTR Add. Code Out: LTC from VCR Audio Channel x to SB-100 (SB-100 TC In) for reading LTC.
(Address Code In/Out cables will connect to either Audio Channel 1 or 2. We like channel 2. If you use an audio channel for Time Code, you may not use that same channel for Audio In/Out. In other words, you can't use the same audio channel for Time Code and Audio.)
6.   GND
7.   Reserved
8.   GPI Out: GPI Out trig.
9.   GND
10   Aux. Vid. Out: Auxiliary Video from another source to SB-100. Switched, but not  recordable
11.   N/C
12.   GND
13.   Mon. Vid. In: Video to TV Monitor.  This is a switched output. 
            VCR Mode        Output
            STOP                Aux. Video (AVID) (Also FFWD, REWD)
            RECORD          VCR Looping Video from "VTR Vid Out"  (E-E)
            PLAY                VCR Video Off-Tape
14.   Mon Aud 1 In:  Audio 1 to TV Monitor
15.   Mon Aud 2 In:  Audio 2 to TV Monitor

S-Video Connectors SB-100 Left Rear Panel - S-Video In/Out Connectors
S-Video In: S-Video In to SB-100 from camera or other video source.  VITC will be inserted.
S-Video Out:  S-Video Out from SB-100 to VCR or other destination.  Contains new VITC.
S-Video In and Composite Video In are shared and must NOT be connected simultaneously.
Composite Video Connectors SB-100 Left Rear Panel - Composite Video In/Out Connectors
Vid Out:(top RCA)  Composite Video Out from SB-100 to VCR or other destination.  Contains new VITC.
Vid. In:(bottom RCA) Composite Video In to SB-100 from camera or other video source.  VITC will be inserted.
Composite Video In and S-Video In are shared and must NOT be connected simultaneously.
LTC Time Code Connectors SB-100 Left Rear Panel - LTC Time Code Connectors
LTC Out:(top RCA)  LTC Out from SB-100 to VCR or other destination.  New generated time code.
LTC In:(bottom RCA) LTC In to SB-100 from VCR or other LTC source for reading time code. (This is the same as 'VTR Add. Code Out' on the Signal Cable Set.)
SB-100 Main Page
Rear Panel Analog Signals      |     Rear Panel Control Signals

 
< Prev   Next >
[ Back ]
 
Making Video Interactive Since 1980!
Home | Client Gallery | Contact BCD | BCD Product Overview | Button Controllers | Time Code Systems | Support & Pricing | Buttons &  Panels | Web Links | Hardware | DVD Machines | Multimedia Tools | Downloads | Pricelist | Support Category | Commands
Copyright © 1995 - 2005 BCD Associates, Inc. - All rights reserved. Trademarks and images from other companies are the property of those companies.  
This page generated in: 0.105408 seconds.