bcdusa dot com - Controllers for Pioneer DVD Machines

bcdusa dot com
Tel. +1.405.843.4574 800-BCD-MPEG (800-223-6734)

Video & Time Code Control Systems
DVD Button & RS-232 Controllers
DVD Production

- BCD Home -

F.Y.I.

Multiple Machines Multiple Controllers

Multiple SB-100 Controllers at NASA Ames Laboratory

BCD Controllers may be individually addressed from a single serial port. The "DECK 3" command selects machine #3. All subsequent commands go to that machine. We can use a VC-16a to accept button presses, then send discrete commands to individual machines (DVD-C7 players & recorders, VC-16b, VC-16a, and SB-100. Custom BCD programming is often required.

Controllers for Pioneer DVD Machines

The Pioneer DVD-V7400 has been replaced by the DVD-V8000. It and the PRV-LX1 were the first truly Industrial DVD players and recorders. They offer both Infrared and Serial control, and that's good because BCD Wired Pushbutton Controllers come in both IR and Serial models !

The BCD VC-16b is the favorite choice of kiosk and exhibit designers because it accurately emulates all commands found on the hand-held remote and permits up to 16 buttons to send any of the commands. The VC-16b can be equipped with multiple IR Emitters to send the same commands to several machines at the same time for multiple machine control.
MSRP $ 525.00 Click Here for more information.

Use the VC-16a when you need a Pushbutton Controller to operate your DVD-V7400 via RS-232. Also can control via IR for DVD commands not available via RS-232. Connect several together through a single serial port and send different commands to several different machines!
MSRP $ 675.00 Click Here for more VC-16a information.

The SB-100 controls RS-232 serial machines and reads and writes LTC and VITC Time Code. Units are addressable to permits multi-unit control from a single serial port. Returns either Time Code or Machine frame numbers to the host computer.
MSRP $ 895.00 Click Here for more SB-100 information.

< Prev

[ Back ]