DVD-1150 Industrial DVD Recorder
Manuals & Firmware Updates for the DVD-1150 DVD Recorder
The most recent is for the current product.
The firmware prefix method is D0 (for 2010), D1 for 2011, etc.
Example: D10923f
Firmware files are zipped hex files for use with FlashMagic.
Click on "Order By: Name, Date, Hits, Ascendant" to change the file display order.
DocumentsDate added
USB Virtual Com Port (VCP) Driver for the DVD-1150. Use Windows Hyperterminal to control the DVD-1150 through your USB port. Windows assigns a 'Virtual' serial port. This executable is for Windows 2000, XP32/64, Vista32/64. MacOS & Linux drivers are available at the FTDI site http://www.ftdichip.com/Drivers/VCP.htm
FlashMagic is the tool from http://esacademy.com that we use for uploading new
firmware to the VC-16b, the TC-100b, and the controller section of the
DVD-1150. This is a Windows application that requires installation on
your computer and requires an RS-232 serial port.
Spec Sheet for DVD-1150
Version 1.24.7 Added diagram for Programming Dongle
Version 1.24.3 Slightly revised. One user noted that we had Finalize listed before the STOP command.
The fastest firmware ever.
Removed some internal status polling during idle times.
Cleaned unnecessary front display characters.
Now reports full 3-digit MPEG board version
