Niagara Video Acquires HDi-250, HDi-SDI & DVD-1150

BCD Closes Business as of 1 November 2018

We will remain working until all orders are shipped.

Niagara Video Acquires HDi-250, HDi-SDI, and DVD-1150
Order now from Niagara Video

Our principal owner is retiring and we have sold the rights to our two main products:
The DVD-1150 and the HDi-250 series will now be manufactured and sold by Niagara Video, Inc. and their dealers.
BCD has sold it's existing product stock and is referring all new orders to Niagara Video.
The transfer is in progress and we expect the transition to be complete before October 31, 2018.

Visit Niagara Video Now!   

 


Back

BCD SB-100
Serial Controller

Rear Panel A/V/TC Connections

SB-100 Rear Panel - Left
Signal Cable Set Signal Cable Set connector -DB-15

Signal Cable Set (Optional for D-15 connector. Inquire for custom quotation)
NOTE:  The labels on the Signal Cable Set are referenced to where they connect. (VCR/Monitor/Aux. Video).

Pin       Description
1.   VTR Ch. 1 Out:  Audio from VCR Audio Channel 1 Out
2.   VTR Ch. 2 Out:  Audio from VCR Audio Channel 2 Out
3.   VTR Vid Out:  Video from VCR.  This is VITC IN to SB-100 for reading VITC.
4.   VTR Add. Code In: LTC to VCR Audio Channel x from SB-100 (SB-100 TC Out) to generate LTC.
5.   VTR Add. Code Out: LTC from VCR Audio Channel x to SB-100 (SB-100 TC In) for reading LTC.
(Address Code In/Out cables will connect to either Audio Channel 1 or 2. We like channel 2. If you use an audio channel for Time Code, you may not use that same channel for Audio In/Out. In other words, you can't use the same audio channel for Time Code and Audio.)
6.   GND
7.   Reserved
8.   GPI Out: GPI Out trig.
9.   GND
10   Aux. Vid. Out: Auxiliary Video from another source to SB-100. Switched, but not  recordable
11.   N/C
12.   GND
13.   Mon. Vid. In: Video to TV Monitor.  This is a switched output. 
            VCR Mode        Output
            STOP                Aux. Video (AVID) (Also FFWD, REWD)
            RECORD          VCR Looping Video from "VTR Vid Out"  (E-E)
            PLAY                VCR Video Off-Tape
14.   Mon Aud 1 In:  Audio 1 to TV Monitor
15.   Mon Aud 2 In:  Audio 2 to TV Monitor


S-Video Connectors   SB-100 Left Rear Panel - S-Video In/Out Connectors
S-Video In: S-Video In to SB-100 from camera or other video source.  VITC will be inserted.
S-Video Out:  S-Video Out from SB-100 to VCR or other destination.  Contains new VITC.
S-Video In and Composite Video In are shared and must NOT be connected simultaneously.

Composite Video Connectors   SB-100 Left Rear Panel - Composite Video In/Out Connectors
Vid Out:(top RCA)  Composite Video Out from SB-100 to VCR or other destination.  Contains new VITC.
Vid. In:(bottom RCA) Composite Video In to SB-100 from camera or other video source.  VITC will be inserted.
Composite Video In and S-Video In are shared and must NOT be connected simultaneously.

LTC Time Code Connectors   SB-100 Left Rear Panel - LTC Time Code Connectors
LTC Out:(top RCA)  LTC Out from SB-100 to VCR or other destination.  New generated time code.
LTC In:(bottom RCA) LTC In to SB-100 from VCR or other LTC source for reading time code. (This is the same as 'VTR Add. Code Out' on the Signal Cable Set.)

SB-100 Main Page
Rear Panel Analog Signals      |     Rear Panel Control Signals
Go to top